field_job_employment_type

field_job_occupational_field_parents_all

job_organization_name

city

state

<h3>Job Description</h3>
Job Description
Perform CNC Machining/Finish Turning operations to final dimensions as specified on engineering drawings.
SPECIFIC DUTIES
<ul>
<li>Perform finish turning, drilling and tapping to final dimensions as specified on engineering drawings and standard procedures.</li>
<li>Set up lathe as required to perform individual finish operations.</li>
<li>Maintain all oil levels and lubricate machine daily; inform supervisor of any equipment defects.</li>
<li>Set correct feeds and speeds as required for drilling, turning and tapping of different types of material.</li>
<li>Refer to T.E.S. manual and shop procedure manual for specific details on press fit.</li>
<li>Transfer any heat number alpha codes to fit slip adjacent to identifying serial number.</li>
<li>Maintain and record time sheets for each operation performed.</li>
<li>Move completed work to proper holding area for disposition following Quality at the Source expectations.</li>
<li>Maintain neat and clean working area, including the removal and disposal of machined chips from machine base.</li>
<li>Wear and maintain proper safety equipment including proper footwear and safety glasses.</li>
<li>Assist in other areas of manufacturing as required.</li>
<li>Work in a safe manner at all times following established policies and procedures.</li>
<li>Work with co-workers as a team player. Communicate effectively and efficiently with co-workers.</li>
</ul>
#IND
Maxcess is an equal employment opportunity employer. We do not discriminate on the basis of race, religion, sex, disability, age, pregnancy, national origin, sexual orientation, or any other characteristic protected by applicable law. We are committed to diversity and inclusion, and all qualified candidates are encouraged to apply.

Machinist: Finish Lathe on 2nd Shift

<h3>Job Description</h3>
Job Description
If you are ready to take on a fresh challenge, grow your career, and contribute to supporting homeland defense and armed services, Wilcox Industries is ready to help you achieve your goals. We are currently seeking a full-time CNC Lathe Operator Machinist for our second shift (Monday through Thursday from 4PM until 2AM). This position runs the CNC lathe Machine, monitors it for problems, and takes corrective action. Roles and Responsibilities
<ul>
<li>Carries out machine operations as instructed.&nbsp;</li>
<li>Inspects parts being loaded and unloaded to meet visual and physical quality standards to avoid scrap.</li>
<li>Works collaboratively with the Lathe Machinists, other machinists and quality team members to produce quality parts within tolerance and avoid scrap and rework.</li>
<li>Keeps shop and work area clean and tidy; wiping down machines and surface areas, keeping workstation and shared workspace clean and organized.</li>
<li>Ensures compliance with ITAR, EAR, and other federal requirements.</li>
<li>Identifies problems, provides possible solutions, seeks guidance, and participates in corrective actions,</li>
<li>Follows process and/or participates in process improvement and process documentation updates.</li>
<li>Other duties as assigned.</li>
</ul>
Qualifications and Requirements
<ul>
<li>High School Diploma or equivalent preferred.</li>
<li>Know how to read or learn to read and understand basic engineering drawings.</li>
<li>Ability to use precision measuring instruments and gauges to check part tolerances according to drawings.</li>
<li>Have required precision measuring tools (caliper, micrometer).</li>
<li>Regular on-site attendance is a necessary function of this position. </li>
</ul>
Physical Requirements Must be able to work in noisy environments. Prolonged periods of standing and bending required. Must be able to lift up-to 35 pounds. Must be able to bend, stretch, squat, and climb to access all parts of the machine. Must wear eye and ear protection.
**Compensation offered may vary depending upon job-related knowledge, skills, and experience.&nbsp;&nbsp;
Wilcox provides equal employment opportunity to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
Powered by JazzHR
ACUh3WXZvR

CNC Lathe Operator Machinist

<h3>Job Description</h3>
Job Description
CNC Machine Set-up - All Shifts
SIG SAUER, Inc. is a leading provider and manufacturer of firearms, electro-optics, ammunition, airguns, suppressors, remote controlled weapons stations, and training. For over 250 years SIG SAUER, Inc. has evolved, and thrived, by blending American ingenuity, German engineering, and Swiss precision. Today, SIG SAUER is synonymous with industry-leading quality and innovation which has made it the brand of choice amongst the U.S. Military, the global defense community, law enforcement, competitive shooters, hunters, and responsible citizens. Additionally, SIG SAUER is the premier provider of elite firearms instruction and tactical training at the SIG SAUER Academy. Headquartered in Newington, New Hampshire, SIG SAUER has over 3,400 employees across sixteen U.S. locations in three states, and four additional global facilities. SIG SAUER is certified a Great Place to Work™. For more information about the company and product line visit: <a href="http://www.sigsauer.com" target="_blank">www.sigsauer.com</a>
Hiring immediately for CNC Machine Set-up at SIG SAUER. The CNC set-up Operator will operate, change over and set-up CNC machines on low to medium complexity components using automated and manual equipment and processes to meet end customer needs. This Set-Up position that draws on prior machining experience and technical problem-solving skills to operate, change over and set-up a minimum of two (2) types of Primary CNC equipment. Works both independently and in a team environment with internal team members, leads, supervisors, quality CNC Programming and Manufacturing Engineering. Also responsible for communicating with management.
Available shifts:
<ul>
<li>Rochester: (Turning)
<ul>
<li>1st: M-F M-F 530a - 145p (5x8)</li>
</ul>
</li>
<li>Newington (SW, Robodrill, Verticals, Makinos) 
<ul>
<li>2nd: M-TH 5p - 330a (4x10)</li>
</ul>
</li>
</ul>
Job Duties &amp; Responsibilities:
<ul>
<li>Regular on-site attendance/punctuality is a necessary function of this position.</li>
<li>Operate, change over and set-up a minimum of 2 types of primary CNC equipment within the time allotted by planning/Operator Standard Work.</li>
<li>Complete all operational processes, checklists and procedures as required.</li>
<li>Identify and assemble cutting tools and tool holder assemblies based on existing process documentation.</li>
<li>Prepare all tooling, fixturing and program prove out for the machines.</li>
<li>Pick-up work offsets.</li>
</ul>
Education/Experience &amp; Skills:
<ul>
<li>High school diploma or general education degree (GED); or related experience and/or training; or equivalent combination of education and experience.</li>
<li>Typically requires a minimum of 6 years of demonstrated CNC experience with a minimum One (1) year as a level III Operator</li>
<li>Must be able to convey ideas and information clearly, concisely, and accurately to others in English, both verbally and in written form.</li>
<li>Must have a professional and respectful attitude.</li>
<li>Capable of adjusting and calculating feeds and speeds and apply knowledge of G and M codes.</li>
</ul>
Why Choose SIG SAUER? 
Compensation and Financial Benefits:
<ul>
<li>Competitive Pay PLUS Shift differentials on off shifts</li>
<li>Annual Employee Bonus</li>
<li>401k from Day 1, employer match at 100% for first 4% contribution, 50% match on next 2%</li>
<li>Short Term/Long Term Disability Insurance</li>
<li>Life Insurance &amp; AD&amp;D</li>
</ul>
Professional Growth and Development:
<ul>
<li>Career Advancement Opportunities</li>
<li>Comprehensive Training Programs</li>
<li>Tuition Reimbursement</li>
<li>License to access online Training platform</li>
</ul>
Health and Wellness:
<ul>
<li>Medical, Dental, &amp; Vision Insurance (starts following 30 days of employment)</li>
<li>Vacation Time</li>
<li>Sick Time</li>
<li>Paid Holidays</li>
<li>3 Floating Holidays</li>
<li>2 Service/Volunteer Days</li>
</ul>
Employee Perks:
<ul>
<li>
<ul>
<li>Generous Employee Firearm PURCHASE or GIFT Program</li>
<li>Employee Discounts</li>
<li>FREE UNLIMITED Classes at the SIG SAUER Academy in Epping, NH,50% discount for spouse/partners</li>
<li>Friends &amp; Family Discounts</li>
<li>Annual Prescription Safety Glass Reimbursement</li>
<li>Annual Safety Shoe Reimbursement</li>
<li>Onsite Gym – Corporate HQ</li>
</ul>
</li>
<li>GREAT PLACE TO WORK CERTIFIED EMPLOYER</li>
</ul>
 Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status or other characteristics protected by law.

CNC Machine Set Up - All Shifts

<h3>Job Description</h3>
Job Description
DEKA Research and Development, housed in Manchester, NH, is looking for an experienced mechanical design engineer to participate in the development of innovative medical devices. They will work as part of a team driving products through their lifecycle including concept generation, prototyping, component and assembly development, testing, and associated documentation. The candidate is expected to be very self-sufficient in handling multiple sub-assembly designs simultaneously, requiring a very low level of guidance. The candidate must have excellent problem solving and analytical skills and be able to learn quickly in a dynamic, fast-paced environment.
How you will make an impact:
<ul>
<li>Generate creative solutions to design problems and demonstrate their viability considering factors such as risk, reliability, manufacturability, serviceability, weight and cost</li>
<li>Transition concepts into products using 3D CAD Solid Modeling, defining requirements, selecting materials and &nbsp;processes, interacting with suppliers and manufacturers, and documenting the development process</li>
<li>Troubleshoot design failure modes to root cause and develop quick, effective solutions</li>
<li>Coordinate with others in a multi-disciplinary team environment including electrical, software, industrial design, and controls</li>
<li>Evaluate designs through prototype testing and requirement verification</li>
<li>Technical review and approval for all mechanical component and assembly designs, analysis, and testing</li>
<li>Set an excellent example of mechanical engineering practices and provide a level of mentorship to less knowledgeable engineers.</li>
</ul>
To be successful in this role you will need to following skills and experience:
<ul>
<li>Bachelor’s Degree in Mechanical or Manufacturing Engineering</li>
<li>Minimum of 5+ years’ experience with mechanical design for manufacturability in a high precision/high volume manufacturing environment (medical preferred)&nbsp;</li>
<li>1+ years’ experience with electro-mechanical devices with embedded software preferred</li>
<li>Familiarity with:
<ul>
<li>Plastic injection molding required</li>
<li>Die casting preferred</li>
<li>Metal injection molding a plus</li>
</ul>
</li>
<li>Exposure to process validation and mold qualifications</li>
<li>Organizational and coordination skills with a detail-oriented mindset and ability to juggle multiple activities</li>
<li>High energy, drive, commitment, self-initiative, and perseverance to drive projects forward to completion</li>
<li>Exceptional verbal and written communication skills with the desire to work in a collaborative environment</li>
<li>Ability to communicate technically with a variety of engineering disciplines</li>
</ul>
About DEKA
DEKA Research and Development in Manchester, one hour from the beach, Boston, and the mountains, is a unique multi-disciplinary company of makers and inventors. Innovations in medical technology, mobility, autonomous robotics, water purification, and sustainable energy are among the focus areas. Designers, engineers, and fabricators tackle difficult problems to make the world a better place using core technologies, intuitive usability, and beautiful design execution. For more information, please visit&nbsp;<a href="http://www.dekaresearch.com" target="_blank">www.dekaresearch.com</a>
About DEKA: One hour from the beach, Boston, and the mountains, the historic Amoskeag Millyard once housed the largest textile mills in the world. It is now home to DEKA Research and Development, where we are taking the same innovation and cutting-edge technology into the modern age. Behind DEKA’s brick walls sits a team of professionals who strive to make a difference every day through thoughtful engineering, design, and manufacturing. Here at DEKA, some of the most innovative and life-changing products of our time are created, and new ideas are always welcome and explored. &nbsp;
Powered by JazzHR
228dpgXtTU

Mechanical Engineer

<h3>Job Description</h3>
Job DescriptionThe Master Scheduler is responsible for developing, coordinating, and optimizing production schedules to ensure deadlines are met. This role involves coordinating with procurement, manufacturing, and logistics teams to align supply chain activities with customer demand, as well as operational capacity. Success in this role requires excellent communication, and a deep understanding of production planning principles. Roles &amp; Responsibilities&nbsp;
<ul>
<li>Develop and maintain master production schedules to meet customer demand that align with company objectives. </li>
<li>Coordinate with planning, procurement, manufacturing, and logistics teams to ensure schedule feasibility.</li>
<li>Monitor production progress and adapt schedules in response to changing priorities or constraints, reporting any discrepancies or variances to all stakeholders.</li>
<li>Analyze capacity constraints and recommend solutions to optimize throughput and improve efficiency.</li>
<li>Ensure alignment between sales forecasts and production plans.</li>
<li>Rectify and/or reconcile differences and inaccuracies that have to do with shipment and deliveries to customers.</li>
<li>Maintain ERP system data integrity for planning parameters and scheduling inputs.</li>
<li>Collaborate with BI team to generate reports on schedule performance, resource utilization, and delivery metrics.</li>
<li>Liaise with sales, operations, and supply chain teams to synchronize planning efforts.</li>
<li>Support new product introductions and engineering changes by integrating them into the schedule.</li>
<li>Lead initiatives to standardize planning processes and scheduling tools.</li>
<li>Contribute to long-term capacity planning and strategic resource allocation.</li>
<li>Coordinate and manage the Sales, Inventory &amp; Operations Planning (SIOP).</li>
<li>The master scheduler works with the planning manager to develop build strategies into daily, weekly, and monthly production schedules.</li>
</ul>
Qualifications &amp; Experience&nbsp; Education &amp; Experience:
<ul>
<li>Bachelor’s degree in business administration or similar discipline. (preferred)</li>
<li>A minimum of 5-10 years working experience in supply chain.</li>
</ul>
Required Skills/Abilities:
<ul>
<li>Must have excellent interpersonal skills and be able to work in a team environment cordially and effectively.</li>
<li>Strong analytical and problem-solving skills.</li>
<li>Must exhibit a high level of flexibility and capacity to work on multiple tasks simultaneously with little supervision.</li>
<li>Must be very organized and detail oriented.</li>
<li>Critical Path Method (CPM): Understanding task dependencies to optimize timelines.</li>
<li>Ability to motivate team members by leading with influence and encouraging ownership.</li>
<li>Regular on-site attendance is a necessary function of this position.&nbsp; </li>
<li>Wilcox is a U.S. government defense contractor, and this position is responsible to control access to export-controlled technology. Qualified candidates must be legally authorized to access.</li>
</ul>
Preferred Skills/Abilities:
<ul>
<li>Proficiency in ERP systems (e.g., SAP, Oracle, Microsoft Dynamics).</li>
<li>Risk Management: Identifying and mitigating scheduling risks to maintain delivery targets.</li>
<li>Understanding and focus on Lean principles.</li>
</ul>
 Physical Requirements:
<ul>
<li>Must be able to sit, stand, walk, talk, hear; use hands and fingers to handle and touch objects, tools, or controls to work in a production environment. Vision abilities required include close vision, distance vision, color vision, and the ability to adjust focus to work. Prolonged periods of sitting at a desk and working on a computer as well as prolonged periods of standing may be required. Must be able to lift 15 pounds at times.&nbsp;</li>
</ul>
 Wilcox provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristics protected by federal, state or local laws. &nbsp;Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities.
Powered by JazzHR
4ZhEc1XEC6

Master Scheduler

<h3>Job Description</h3>
Job Description
InnoTECH Staffing is looking to hire a fulltime/permanent Senior Mechanical Engineer who has 15+ years experience and who has custom automation machine design including integration of robots, feeders, process, servo actuated devices, pneumatics, conveyors, etc. for a company in Southern, New Hampshire.
Description The Senior Mechanical Engineer works with the company's customers and designs custom machinery in exciting markets. Senior Mechanical Engineers are individuals who manage all aspects of the project from conceptual design to installation. These individuals are also responsible for major contributions to the design as they will manage the day-to-day detailed design advancement. ESSENTIAL DUTIES AND RESPONSIBILITIES 
<ul>
<li>Create detailed concept sketches to refine proposed concepts. Proficient with SolidWorks. Able to create models of nests, overall system layouts, and complex station designs</li>
<li>Responsible for design approval documents for system design</li>
<li>Conduct weekly design reviews with customers and provide minutes of meetings</li>
<li>Responsible for monitoring and managing customer requirements, costs, and delivery</li>
<li>Must be able to work concurrently on one or more projects</li>
<li>Responsible for project Bill of Materials</li>
<li>Work with procurement to ensure all material deliveries</li>
<li>Manage assembly priorities with production supervisor</li>
<li>Work with Controls Engineers to ensure electrical and controls needs are met as required</li>
<li>Manage Designers and Detailers for specific project</li>
<li>Review and approve detailed drawing packages for production</li>
<li>Proactively manage changes in project scope through ECOs and schedule changes</li>
<li>Oversee debug and testing phase to ensure all customer requirements are met</li>
<li>Oversee and perform FAT with customer</li>
<li>Ensure proper shipment and installation of equipment</li>
<li>Responsible for delivery of all customer documentation </li>
</ul>
Qualifications 
<ul>
<li>Advanced knowledge in machine design or build of products in the OEM vertical and having designed at least 5 automated systems. Knowledge must span from conceptual design through installation and service of the systems.</li>
<li>15+ years of relevant design and project experience.</li>
<li>Working knowledge of SolidWorks.</li>
<li>Experience in working with a project scheduling tool such as Microsoft Project.</li>
<li>Prior success in establishing effective relationships and communications with Customers.</li>
<li>Strong leadership, professionalism, communication, and project management skills. </li>
</ul>
Other Skills And Abilities 
<ul>
<li>Excellent interpersonal, negotiation, problem-solving and conflict resolution skills</li>
<li>Excellent organizational skills and attention to detail</li>
<li>Excellent time management skills with a proven ability to meet deadlines.</li>
<li>Ability to act with integrity, professionalism, and confidentiality.</li>
<li>Proficient with Microsoft Office Suite or related software </li>
</ul>
EDUCATION A four-year degree in mechanical engineering preferred Company's CORE VALUES 
<ul>
<li>We take pride in the reliability of our team and the difficult problems we solve for customers.</li>
<li>We deliver real customer value that positively impacts the lives of those around us.</li>
<li>We are dependable. Relationships and trust matter.</li>
<li>Our ingenuity and desire to improve lives will complement our suite of solutions.</li>
<li>We strive to demonstrate that our attention to detail does not start or end with the solutions we engineer and deliver.</li>
<li>We believe exceptional service is better demonstrated than said.</li>
</ul>
Depending on experience and fit, compensation includes base salary up to $200K, bonus and full benefits.

Senior Mechanical Engineer - industrial automated equipment machine design

<h3>Job Description</h3>
Job DescriptionJob Description 
JOB DETAILS
Day Shift: Mon- Thursday 6a - 4:30p
Pay starting at $19 per hour
DUTIES AND RESPONSIBILITIES
The Harvey Quality Assurance Technician III role is responsible for daily checks on key equipment and processes to ensure adherence to documented guidelines. Timely response to problems on the manufacturing floor as well as follow up root cause and corrective actions is critical to positive performance. These problems can vary between process issues with equipment to nonconforming material from vendors ending with detailed and accurate communication of these findings to involved parties.
<ul>
<li>Inspection of manufactured material to company quality standards</li>
<li>Training of manufacturing personnel to uphold company quality standards</li>
<li>Work in teams to define and implement robust process controls/error proofing solutions that ensure product conforms to specification and performance standards</li>
<li>Investigate as an individual nonconforming material, root cause, and present findings to vendors and production lines in a well documented format</li>
<li>80%+ of time spent work independently in a manufacturing assembly setting</li>
<li>Other duties as required</li>
<li>Additional overtime as required with notice, typically limited to Monday-Friday</li>
</ul>
Qualifications 
Required Qualifications and Skills:
<ul>
<li>Being able to work as needed in a group and individual setting</li>
<li>Ability to visually inspect parts and distinguish between conforming and nonconforming parts per guidelines</li>
<li>Ability to make decisions by self and support with documentation</li>
<li>Effective written and verbal communication skills with team members, departments, and vendors</li>
<li>Strong organization skills</li>
<li>Ability to multi-task and manage stressful situations</li>
<li>Able to prioritize tasks in an efficient manner in order to meet deadlines</li>
<li>Ability to perform mathematical calculations as necessary</li>
<li>Strong commitment toward quality, safety, and continuous improvement</li>
<li>Preferred: Knowledge of Window Quality specifications</li>
<li>Preferred: Knowledge of Home Construction</li>
</ul>
Education &amp; Experience Requirements:
<ul>
<li>High School Diploma or General Education Degree (GED).</li>
<li>2 – 5 years Quality/MFG experience in a non-electronics/non-food setting</li>
<li>Experience using Measuring Equipment (Tape Measure and Calipers required)</li>
<li>Basic knowledge in use of inspection equipment and reading technical drawings</li>
<li>Basic knowledge of quality systems and tolerances (+/-, passible defects, etc)</li>
<li>Strong aptitude in process improvement and problem solving</li>
<li>Strong computer skills (Microsoft Word and Excel)</li>
<li>Must be able to read, write, and speak English at an intermediate level</li>
</ul>
 Additional Information 
Site Address: 30 Jacks Bridge Rd., Londonderry, NH 03053
Why work for Cornerstone Building Brands?
Our teams are at the heart of our purpose to positively contribute to the communities where we&nbsp;live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. You can also join one of our Employee Resource Groups which help support our commitment to providing a diverse and inclusive work environment.
*Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement.
All your information will be kept confidential according to EEO guidelines
Why work for Cornerstone Building Brands?&nbsp;
Our teams are at the heart of our purpose to positively contribute to the communities where we&nbsp;live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development.&nbsp;
*Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement.
Cornerstone Building Brands is an Equal Opportunity Employer.&nbsp;
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here&nbsp;along with This Organizations Participation in E-Verify Poster here.&nbsp;If you'd like to view a copy of the company's affirmative action plan&nbsp;for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or <a href="mailto:HRCompliance@cornerstone-bb.com" target="_blank">HRCompliance@cornerstone-bb.com</a>. If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or <a href="mailto:HRCompliance@cornerstone-bb.com" target="_blank">HRCompliance@cornerstone-bb.com</a>. This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Notice of Recruitment Fraud
We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Manufacturing Quality Assurance Technician 1st Shift

<h3>Job Description</h3>
Job Description
Manufacturing Engineer
The Manufacturing Engineer is responsible for continuous improvement and support of the production of current and future product lines. Focus is on improving manufacturing processes, enhancing product quality, and increasing efficiencies. Collaboration with cross-functional teams to design and implement innovative solutions.
Key responsibilities include:
<ul>
<li>Process Development &amp; Optimization – Design, implement, and refine manufacturing processes and tooling to enhance production operations.</li>
<li>Standardization – Develop flexible work instructions to standardize fabrication and assembly procedures, especially for semi-custom product lines.</li>
<li>Testing &amp; Quality Assurance – Design and implement testing equipment and procedures to ensure design validation, maintain quality control, and meet product certification requirements.</li>
<li>Cross-functional Collaboration – Collaborate with engineering and manufacturing teams to support new product development and introduce new innovative solutions.</li>
<li>CNC Programming – Develop and implement G-code programming for CNC machines to optimize machining processes.</li>
<li>Safety Compliance - Maintain and promote safe working environment in accordance with best practices and safety regulations.</li>
</ul>
Requirements:
<ul>
<li>Proficiency in CNC programming and understanding manufacturing automation.</li>
<li>Experience with CAD software and manufacturing simulation tools; primarily Solidworks, Mastercam, and AutoCad/Draftsight.</li>
<li>Excellent problem-solving skills and attention to detail.</li>
<li>Ability to work effectively in a team-oriented environment, with a collaborative approach to solving problems.</li>
<li>Strong attention to detail and a commitment to high-quality standards.</li>
<li>Knowledge of testing procedures, quality control methodologies, and relevant certification processes.</li>
<li>Understanding of manufacturing safety protocols. </li>
<li>Ability to create G-code programming for CNC machines</li>
</ul>
Essential Functions:
<ul>
<li>Design, develop, and implement manufacturing processes and systems.</li>
<li>Analyze and improve existing manufacturing processes for efficiency and effectiveness.</li>
<li>Conduct time and motion studies to identify opportunities for process improvements.</li>
<li>Collaborate with product design teams to ensure manufacturability and cost-effectiveness of new products.</li>
<li>Develop and maintain process documentation, including work instructions and standard operating procedures.</li>
<li>Troubleshoot and resolve manufacturing issues, providing technical support to production teams.</li>
<li>Lead and participate in continuous improvement initiatives</li>
<li>Evaluate and recommend new manufacturing technologies and equipment.</li>
<li>Conduct training sessions for production staff on new processes and equipment.</li>
<li>Ensure compliance with safety and quality standards in all manufacturing activities. </li>
</ul>
 
Experience:
<ul>
<li>Minimum of Associates Degree in Manufacturing Engineering, Mechanical Engineering, or related field.</li>
<li>Experience in a manufacturing environment (3+ years), lean manufacturing principles and quality improvement methodologies.</li>
<li>Experience with CAD software and manufacturing simulation tools; Solidworks, Mastercam, and AutoCad/Draftsight.</li>
</ul>

Job Type: Full-time

Schedule:
<ul>
<li>8-hour shift</li>
<li>Day shift</li>
<li>Monday to Friday</li>
</ul>
Work Location:
<ul>
<li>In person – Charlestown, NH</li>
<li>In person – Tampa, FL</li>
</ul>

Manufacturing Engineer

<h3>Job Description</h3>
Job DescriptionTitle: Screen Press Operator Type of Placement: Temp to PermShift: 1st Shift – 7:00am-3:30pmPay/Pay Range:$16hr ($17-$25 Depending on Experience)Benefits upon Hired Perm:
<ul>
<li>Health and Dental Insurance</li>
<li>ST/LT Disability</li>
<li>401k</li>
<li>Aflac</li>
<li>Life Insurance</li>
<li>Freedom Plan (medical reimbursement)</li>
<li>Paid Holidays upon hiring</li>
<li>After 1 year – 2 weeks of vacation, 5 sick days, 2 personal days</li>
</ul>
ummary:PLEASE NOTE: Experience Required (Must show competence as a Press Assistant first or have equivalent experience from another shopThe Press Operator will train the Press Assistant, monitor, and report progress to supervisor. The Press Operator will understand and maintain quality standards while keeping up with production expectations as well as help with unloading, stacking or assist in other departments as needed.ESSENTIAL FUNCTIONS:
<ul>
<li>Safely and properly operate control box</li>
<li>Load shirts on the press accurately for specified placement</li>
<li>Monitor shirts being unloaded by the Press Assistant for quality</li>
<li>Make sure print is consistent throughout the print run</li>
<li>Troubleshoot any issues that arise throughout the print run </li>
<li>Make necessary adjustments</li>
<li>Make sure press crew is achieving daily numbers while maintaining quality</li>
<li>Helping in other departments as needed</li>
</ul>
ET-UP AND BREAKDOWN OF PRESSES:
<ul>
<li>Read spec sheets to determine screen sequence</li>
<li>Set-up/Line-up screens and register them properly</li>
<li>Use proper squeegees/flood bars for each print job</li>
<li>Add correct inks</li>
<li>Fill out the approval check list accurately</li>
<li>Press Clean-up</li>
</ul>
EDUCATION and/or EXPERIENCE:
<ul>
<li>High School Diploma or GED</li>
</ul>
SKILLS AND ABILITIES:
<ul>
<li>Detail oriented</li>
<li>Oral communication skills </li>
<li>Reading comprehension</li>
<li>Professionalism</li>
<li>Time management</li>
<li>Ability to detect color</li>
<li>Dexterity skills</li>
<li>Written Communication skills </li>
<li>Organizational skills</li>
</ul>
Environmental Conditions:While performing the duties of this job, the employee is regularly exposed to work near moving mechanical parts and vibration. The employee is occasionally exposed to fumes or airborne particles, extreme heat and humidity.The noise level in the work environment is usually moderate.Physical Capabilities:Most positions may require employees to be on their feet all day. Employees may be expected to lift to 30 pounds throughout the day.About Wicked Staffing Solutions:We have built long-standing relationships with some of the most reputable and well-known top companies that are hiring in manufacturing, distribution, customer service, engineering, electronics and many other industries. We offer temporary, temp-hire, and direct placement opportunities, in a variety of positions.Equal Opportunity Employer

Screen Press Operator

<h3>Job Description</h3>
Job DescriptionWe are currently seeking a full-time Senior Manufacturing Engineer.&nbsp; This position is responsible to transition designs to manufacturable solutions as well as provide continuous engineering support to the production team.&nbsp; The expectation is also to provide mentorship and instruction to junior engineers as well as work closely with program management, quality, and other internal teams.&nbsp; Roles and Responsibilities
<ul>
<li>Provide engineering and prototyping support with a focus on manufacturability and assembly throughout the design, transition, and sustain portions of the product development process.</li>
<li>Generate complete engineering packages (including bill of materials, fully dimensioned piece part drawings, top level assemblies, process documents, etc.) required to produce products at high volume.</li>
<li>Conduct prototype builds in conjunction with operations team. Document and implement changes to reduce build time and decrease cost of the system.</li>
<li>Lead Operational Process Improvement initiatives. Identify areas of opportunity, generate a business case, and work with cross functional teams to implement solutions to increase Wilcox productivity, decrease cost, and reduce rework.</li>
<li>Lead troubleshooting of technical issues on the production line. Clearly communicate the plan of action with all stakeholders.</li>
<li>Interface directly with the program, manufacturing, quality, and purchasing teams. Quickly work with programmers, and machine operators.</li>
<li>Contribute to comprehensive design reviews throughout the product development cycle.</li>
<li>Communicate the status of assigned work including current progress, estimated time to completion, risks, and any required software, equipment, tools, etc. necessary to accomplish assigned work.</li>
<li>Work within defined document control processes. Manage the PDM environment for programs.</li>
<li>Develop prototype and production test fixtures, inspection requirements and procedures as required.</li>
<li>Provide mentorship and guidance to junior engineers.</li>
<li>Conduct engineering trainings as requested.</li>
<li>Ensures compliance with ITAR, EAR and other federal requirements.</li>
<li>Perform other duties as necessary when directed to do so to support business needs.</li>
</ul>
Qualifications and Requirements
<ul>
<li>BS in Engineering and 8+ years of experience, or an equivalent combination of 12 years education, training, and experience.</li>
<li>A high degree of technical expertise in electro-mechanical system design.</li>
<li>Strong understanding of GD&amp;T, tolerance stack-up, and fit check analysis.</li>
<li>Proven designs making use of machined, molded, casting, extruded and other manufacturing methods.</li>
<li>Able to adapt to modern software and work methodologies.</li>
<li>Excellent written, verbal and interpersonal communications skills.</li>
<li>Proficient with the Microsoft Office suite.</li>
<li>Static FEA experience</li>
<li>Experience with military standards, specifically MIL-STD-810 and MIL-STD-461 a plus</li>
<li>Familiar with rapid prototype methods such as 3D printers</li>
<li>Regular on-site attendance is a necessary function of this position.</li>
</ul>
**Compensation offered may vary depending upon job-related knowledge, skills, and experience.&nbsp;&nbsp; Wilcox provides equal employment opportunity to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
Powered by JazzHR
avtmBeUBUw

1,731 Manufacturing Jobs