field_job_occupational_field_parents_all

field_job_employment_type

job_organization_name

city

state

<h3>Job Description</h3>
Job Description
Redi Rock Loader Operator &amp; Laborer
Who we are:
We're Carroll Concrete, a proud family owned and operated company for over 50 years! We are focused on leading the industry with integrity. It is our mission to provide superior service to our customers and a safe and fulfilling work environment for our entire staff, all while delivering the highest quality products, and we're GROWING - FAST! COME GROW WITH US!
Who you are:
The Redi-Rock Loader Operator &amp; Laborer is responsible for all accurate stocking of inventory in the yard. Responsibilities include making sure the correct Redi-Rock product is loaded on each tractor trailer for delivery based upon the ticket. This position also coordinates all activity in the stock yard. The Redi-Rock Loader Operator &amp; Laborer and the Redi-Rock Production Foreman and the Redi-Rock Division Manager work closely together daily to ensure complete customer satisfaction and quality.
Loader Operator Duties:
<ol>
<li>Safely and efficiently operate a front-end loader with forks to load Redi-Rock product for delivery.</li>
<li>Safely and efficiently operate a front-end loader with forks to stock inventory in the yard.</li>
<li>Fully understand and follow the company's philosophy as it pertains to customers</li>
<li>Ensure contracted and company owned trucks are loaded with accurate product for delivery</li>
<li>Act in a courteous and professional manner to all customers including third party</li>
<li>Complete all maintenance on plant for the safe and efficient operation of the assigned plant including Plant/Yard inspections and maintenance (as per the Plant Maintenance Schedule)</li>
<li>Maintain concrete block forms and surrounding area. Pour, strip and stockpile blocks in a neat, orderly, and safe manner</li>
<li>Keep all yard and plant areas neat, orderly, and as safe as possible at all times</li>
<li>Snow plowing, removal, and sanding of areas (if necessary)</li>
<li>Perform daily pre-trip inspections</li>
<li>Perform weekly grease (more frequently when needed)</li>
<li>Ensure that equipment is always kept clean inside and out</li>
</ol>
Redi-Rock Laborer Duties:
<ol>
<li>Maintain concrete block forms (structurally)</li>
<li>Strip, clean, oil and close forms</li>
<li>Stack blocks for loader operator, stack in yard if needed</li>
<li>Clean plant daily, sweep, keep area tidy and safe, power wash as needed</li>
<li>Vibrate concrete forms with 20lb. backpack vibrator</li>
<li>Maintain stockpile of rebar hooks or loops for blocks</li>
<li>Maintain a positive attitude towards work and the team</li>
<li>Maintain and clean kitchen area daily</li>
<li>Follows appropriate environmental rules and regulations</li>
</ol>

Desired Qualifications
Education: High School Education or equivalent
Skills:
<ol>
<li>Must be dependable, a team player and be safety conscious </li>
<li>Must be able to deal professionally with plant employees and other drivers </li>
<li>Common sense and good judgement and willingness to work </li>
<li>Excellent defensive driving skills</li>
<li>Advanced knowledge of equipment, plant and truck operations</li>
<li>Must possess exceptional analytical and problem-solving skills</li>
</ol>

Experience:
<ol>
<li>Previous experience as a Redi-Rock Laborer to understand the block type and product is helpful</li>
<li>Previous experience operating equipment including a front-end loader with forks</li>
</ol>

Licenses and Certification Requirements: Valid Driver’s License
Restrictions: 
<ol>
<li>Must be able to maneuver in and out of equipment safely </li>
<li>Must be able to lift or maneuver up to 75lbs. multiple times throughout the workday</li>
<li>Must inspect all areas of equipment and plant, daily</li>
<li>Must perform plant maintenance </li>
<li>Perform multiple tasks under stressful situations over long periods of time while maintaining proper composure</li>
<li>Must be able to work flexible hours as necessary</li>
<li>Perform multiple tasks of sustained viewing activity at rear of loader utilizing mirrors while driving and manipulating controls</li>
</ol>

Schedule: We guarantee 40 hours all year round! Voluntary layoff accepted. Must be able to work flexible hours as necessary. Some Saturday work required
Salary: Discussed at Interview
What’s In It for YOU! YES! Details below
Medical, Dental and Vision Insurance
Ancillary Benefits (STD, LTD, AD&amp;D, Life) - company paid
HRA and FSA programs
401k w/ Matching
Vacation
Paid holidays
Employee Assistance Program (EAP)
Employee Referral Program -$1000.00 paid over 4 payments.
Paid uniforms services
$125.00 boot allowance
Paid end of year shutdown
Plus, many more!

This job description, as written for the position of Redi-Rock Loader Operator &amp; Laborer for Carroll Concrete Company/Newport Sand &amp; Gravel Co., Inc. is an accurate reflection of the essential job functions for this position. Subject to change without notice at Carroll Concrete Company's discretion.

Redi-Rock Loader & Laborer

<h3>Job Description</h3>
Job Description
Heavy civil construction company. &nbsp; Looking for a strong field knowledgeable superintendent/Foreman. &nbsp; Small company so you have the opportunity to be involved in all phases. Knowledge of construction practices and resolving field problems and processes. Must be cost and revenue focused
Company DescriptionWe are a Heavy Civil Construction company operating NH and VT. There is travel, very little work in our backyard. 
<h3>Company Description</h3>
We are a Heavy Civil Construction company operating NH and VT. There is travel, very little work in our backyard.

Construction Superintendent/ Foreman

<h3>Job Description</h3>
Job Description
Who You Are…
 
You are always working to level up in your life, both personally and professionally. 
 
You love running toward problems and enjoy being recognized as a high performer, and thrive in a fast paced environment.
 
You love serving others and helping them succeed, because you know that will bring you success in life.
 
You want to work with like minded team members and have fun at work.
 
You are looking for a company that has paths to growth, and you want to experience the upside of the value you bring.
 
 
Who We Are…
 
We are what you have been looking for.
 
Wise Coatings is a floor coating company that Entrepreneur Magazine has awarded Top 100 Emerging Franchise Brands in the United States. 
 
We are one of the fastest growing floor coating companies - and we are just getting started.
 
We have a strong business model, and a path for employees to start as a technician and work their way up to owning their own franchise location. 
 
As a Floor Coating Technician, every day will be different. 
 
Just check out what your fellow co-workers say about working at Wise Coatings : <a href="https://youtu.be/YMNYS6fV4E4" target="_blank">https://youtu.be/YMNYS6fV4E4</a>
 
 
You can qualify to join our team if...
 
<ul>
<li>
You are upbeat and positive each day.
</li>
<li>
You can check your ego at the door and work with a team (Our people skills and relationships are key to our success).
</li>
<li>
You are tough, mentally and physically.
</li>
<li>
You are looking to grow professionally AND personally.
</li>
<li>
You are eager to learn and can take constructive criticism without getting offended.
</li>
</ul>
 
Here is what we have to offer you:
 
<ul>
<li>
You will be trained on how to transform floors in garages, basements, warehouses, etc. Floor coatings require no previous experience and can be learned quickly, with a determined individual, and our advanced training system. 
</li>
<li>
You will be trained in the art of floor coatings, safety and customer service. Our training programs will get you up to speed quickly. It’s up to you how fast you advance in our company.
</li>
<li>
You will be trained in our company culture so you can become a positive influence on your team mates, and our team can influence you and help you succeed at work and in your personal life.
</li>
<li>
You will start as a field technician and can quickly be promoted to performance pay, where you can earn as much as $18-$25/hr. Technicians with prior experience start at $25+ 
</li>
</ul>
 
 
The basic requirements for this job are as follows:
 
<ul>
<li>
You are in good physical shape, and able to move around easily and at a fast pace (our products cure fast)
</li>
<li>
You have a valid Driver’s License and reliable transportation to and from work sites.
</li>
<li>
You are 18 or older.
</li>
<li>
You have a positive attitude.
</li>
<li>
Can pass a background check.
</li>
</ul>
 
 
The best of our technicians will rapidly graduate to a coveted Crew Leader position. Crew Leaders consistently earn over $25-$30/hour and have access to other awesome perks. Our Crew Leaders are just that: LEADERS. They love their jobs, they love training their technicians, they love serving our customers. They love this company. They work very hard but get to work outside every day without someone standing over their shoulders.
 
If you have experience, we may be able to start you at the full position of Crew Leader. If you have limited or no experience, we will start you out as a junior technician and give you substantial pay increases as your training progresses.
 
Most trainees reach Senior Field Technician within 3 months. Top performers can reach Crew Leader status very quickly.
 
 
We are an equal opportunity company. It’s all about attitude and hustle at Wise Coatings. If you are the right person it will not be because of your age, race, or gender. 
 
Apply now and schedule your good fit call!

Epoxy Floor Coatings Technician

<h3>Job Description</h3>
Job DescriptionKitchen &amp; Bath Designer Are you ready to bring excitement and energy to a creative, customer-focused role in our cabinetry showroom? At Silver Lake Cabinetry we don't just design kitchens and bathrooms, we help clients create the heart of their home. As the retail showroom for Blackdog Builders, Inc., we're part of a larger family of six companies known for being an industry leader in residential remodeling across southern New Hampshire and northeastern Massachusetts since 1989. What does a Kitchen &amp; Bath Designer do at Silver Lake Cabinetry?As a Kitchen &amp; Bath Designer at Silver Lake Cabinetry, you'll play a crucial role in designing and selling functional, affordable, and beautiful spaces. You'll be part of a collaborative team delivering exceptional experiences from first impressions to final walkthroughs.Your responsibilities would include:Product Sales &amp; Design 
<ul>
<li>Collaborate with clients to design and sell:
<ul>
<li>Cabinetry</li>
<li>Fixtures</li>
<li>Countertops</li>
<li>Hardware
<ul>
<li>Cabinet Installation (when requested) </li>
</ul>
</li>
</ul>
</li>
<li>Build in-depth product knowledge across all lines we carry</li>
<li>Perform accurate job-site measurements</li>
<li>Provide quotes and proposals to clients</li>
<li>Follow up and close sales</li>
<li>Generate cabinet orders and submit them to our Order Facilitator
<ul>
<li>Note: While the Order Facilitator provides a secondary review, Designers are ultimately responsible for order accuracy</li>
</ul>
</li>
<li>Maintain communication with clients post-sale to ensure satisfaction</li>
</ul>
What You Bring to the Team:Required Qualifications
<ul>
<li>At least 3 years of kitchen &amp; bath design experience</li>
<li>Proficiency with 2020 Design or Revit BIM software</li>
<li>Ability to create:
<ul>
<li>As-built drawings</li>
<li>Detailed floor plans and elevations for kitchen and bath projects</li>
</ul>
</li>
<li>Familiarity with cabinetry pricing to achieve a specified profit margin</li>
<li>Keen attention to detail from concept through completion</li>
<li>Competence in Microsoft Office Suite</li>
<li>Ability to work independently with strong organizational skills</li>
<li>Strong written, verbal and visual communication skills</li>
<li>Reliable transportation and a good driving record</li>
<li>Ability to work 5 days/week, 8-hour shifts, Tuesday through Saturday</li>
<li>Willingness to undergo a background check</li>
</ul>
“Nice to Have” Qualifications
<ul>
<li>NKBA Certification</li>
<li>Experience with Chief Architect</li>
<li>Familiarity with working alongside local contractors/developers</li>
</ul>
What we Offer:
<ul>
<li>Hourly Rate + Commission:
<ul>
<li>$22.00 - $28.00/hour (based on experience)</li>
</ul>
</li>
<li>Health Insurance with a $500 monthly employer contribution</li>
<li>7 Paid Holidays</li>
<li>5 days PTO in your 1st year</li>
<li>401(k), with a 50% company match (up to 5% of your pay)</li>
<li>Paid Parental Leave</li>
<li>Company paid Term Life Insurance and Accidental Death &amp; Dismemberment Insurance</li>
<li>Company Profit-Sharing Plan</li>
<li>A workplace culture that values your contributions</li>
<li>A fun and rewarding work environment!</li>
</ul>
Ready to Build Your Future with Blackdog?If this sounds like the opportunity you've been waiting for, we'd love to hear from you! ~ Apply Now and bring your creativity to life at Silver Lake Cabinetry!Blackdog Builders, Inc. is an Equal Opportunity Employer. We do not discriminate based on age, gender, disability, military status, race, religion, marital status, or any other protected class under the law. We are a drug-free workplace and comply with ADA regulations as applicable. 
Compensation details: 22-28
 
PIcbd99a21ddb2-25405-36132781

Kitchen & Bath Designer (Silver Lake Cabinetry)

<h3>Job Description</h3>
Job DescriptionCompany Description 
Canam Bridges designs, manufactures and installs steel bridges for major infrastructure contractors across North America. Canam Bridges is a member of Canam Group, which has over 3,500 employees and operates 12 plants in North America, as well as engineering offices in Canada, Romania, India and the Philippines.
Job Description 
MUST BE AUTHORIZED TO WORK IN THE USA
FIRST SHIFT
Different levels and pay structure based on knowledge and experience.
SECOND SHIFT
Competitive Shift Differential
Job Summary Perform welding of various company products in compliance with the corporate mission and values, and departmental financial objectives.
Essential Functions
<ul>
<li>
Perform production welding and other tasks as assigned by the supervisor;
</li>
</ul>
<ul>
<li>
Produce CJP, PJP and fillet welds in ALL welding positions using FCAW and SMAW welding processes;
</li>
<li>
Produce CJP, PJP welds in the 1G and 2G welding positions and be able to produce fillet welds in the 1F and 2F welding positions using SAW-A and SAW-SA welding processes;
</li>
<li>
Be willing and able to operate various pieces of grinding equipment for extended periods of time;
</li>
<li>
Inspect products to ensure quality and be able to identify and correct unacceptable areas;
</li>
<li>
Effectively set up and operate mechanical and manual cutting devices;
</li>
<li>
Effectively set and use air carbon arc gouging equipment;
</li>
<li>
Effectively set up and operate all welding equipment;
</li>
<li>
Understand and interpret shop drawings, prints and weld symbols;
</li>
<li>
Able to read and use standard and metric measuring devices;
</li>
<li>
Assist in training efforts and possess the ability to mentor and assist other welding personnel;
</li>
<li>
Maintain equipment and work area and be able to identify potential hazards and make necessary corrections;
</li>
<li>
Perform independently and function in a safe, professional and conscientious manner;
</li>
<li>
Maintain a positive work atmosphere by behaving and communicating in an effective professional and courteous manner with customers, coworkers, clients and supervisors;
</li>
<li>
Possess the ability to safely and effectively operate, use and maneuver cranes and other lifting devices, as well as possessing the ability to select and correctly use rigging and other related material handling equipment. &nbsp;
</li>
</ul>
Additional Responsibilities
<ul>
<li>
Perform other job-related duties as assigned by supervision including but not limited to, cleaning, trash and scrap removal, and other production related jobs;
</li>
<li>
Perform daily cleaning and maintenance of the work area and shop;
</li>
<li>
Understand and be in compliance with all of Canam Bridges internal documentation systems;
</li>
<li>
Work in a safe, professional and conscientious manner.
</li>
</ul>
Qualifications 
<ul>
<li>High school diploma or GED preferred;&nbsp;</li>
<li>
Welding experience and/or training, or an equivalent combination of education and experience;
</li>
<li>
Must possess basic reading and mathematical skills. &nbsp;
</li>
</ul>
 Additional Information 
Physical Demands
The ability to stand continuously is essential, with occasional walking and sitting. The nature of the position will require employees to perform a wide range of physical activities ranging from pushing, pulling, lifting, carrying heavy objects (60 lbs.) climbing, crouching, kneeling, bending and handling. Repetitive motions and awkward body positioning. Vision requirements include: close vision, distance vision, peripheral vision, depth perception and the ability to focus.
Work Environment The following working environments are as follows but not limited to:
Required to work near moving mechanical parts and machinery. Working conditions may include being outside or inside in all environmental conditions. Potential exposure to: fumes and airborne particulates. Potential risk of electric shock. Potential burn hazards such as: UV light radiation, open flames, sparks and other sources. Noise levels in the work environment will require the use of appropriate hearing protection at all times. The correct usage of PPE will be required at all times.
This is a safety-sensitive position&nbsp; A safety-sensitive position has been defined as one where the employee’s responsibilities impact the health and safety of themselves, coworkers and / or the public (in this case the end-user of our product).&nbsp; All production and production support positions fall into this category.&nbsp;&nbsp;
Remuneration We offer a competitive compensation and benefits package as well as excellent opportunities for training and advancement.
Canam&nbsp;is an Equal Opportunity/Affirmative Action employer.&nbsp;All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law.
If you need a reasonable accommodation for any part of the employment process, please contact us by email at <a href="mailto:lorri.boynton@canamgroupinc.com" target="_blank">lorri.boynton@canamgroupinc.com</a> and let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this e-mail address.

Welder

<h3>Job Description</h3>
Job DescriptionJob Description 
BOTH SHIFTS AVAILABLE
SECOND SHIFT DIFFERENTIAL
JOB SUMMARY:
Fabricate, erect, and dismantle structural steel bridge framework according to engineered drawings and blueprints, performing such work consistent with corporate mission, values and departmental financial objectives.
ESSENTIAL FUNCTIONS:
<ul>
<li>
Set&nbsp;up hoisting equipment, raising and placing structural-steel members, with basic rigging knowledge for raising and placing structural steel members.
</li>
<li>
Fasten&nbsp;steel members to the cable of hoist, using chain, cable or rope.
</li>
<li>
Signal&nbsp;worker operating hoisting equipment to lift and place steel members.
</li>
<li>
Guide&nbsp;member, using tag line in order to guide it into position.
</li>
<li>
Pull, push&nbsp;or pry&nbsp;steel members into approximate position while member is supported by hoisting device.
</li>
<li>
Force&nbsp;members into final position, using turnbuckles, crowbars, jacks and hand tools.
</li>
<li>
Align&nbsp;bolt holes in steel members using drift pins or spud wrenches.
</li>
<li>
Verify&nbsp;vertical and horizontal alignment of members using plumb bob and level.
</li>
<li>
Bolt&nbsp;align members to keep them in position until they can be permanently bolted or welded in place.
</li>
<li>
Cut&nbsp;and weld&nbsp;steel members to make alterations using oxyacetylene welding equipment and supplies.
</li>
<li>
Load, transport, unload&nbsp;material, tools, equipment and supplies.
</li>
<li>
Lift, position, and secure&nbsp;materials and work pieces during installation.
</li>
<li>
Perform&nbsp;minor maintenance or cleaning activities of tools and equipment.
</li>
<li>
Responsible for observing and complying with all safety and project rules, including wearing required personal safety equipment.
</li>
<li>
Perform&nbsp;other duties as required.
</li>
</ul>
Qualifications 
QUALIFICATIONS:
<ul>
<li>
High school diploma or GED preferred.
</li>
<li>
Must possess basic reading and mathematical skills.
</li>
<li>
Some mechanical skills normally obtained from experience with manufacturing or construction processes, including reading a tape measure and using power and hand tools.
</li>
</ul>
 Additional Information 
Company Description
Canam Bridges designs, manufactures and installs steel bridges for major infrastructure contractors across North America. Canam Bridges is a member of Canam Group, which has close to 3,500 employees and operates 11 plants in North America, as well as engineering offices in Canada, Romania, India and the Philippines.
PHYSICAL DEMANDS:
The ability to stand continuously is essential with occasional walking and sitting.&nbsp; The nature of the position will require employees to perform a wide range of physical activities ranging from pushing, pulling, lifting, carrying heavy objects (60–100 lb) climbing, crouching, kneeling, bending and handling. Repetitive motions and awkward body positioning.&nbsp; Vision requirements include: close vision, distance vision, peripheral vision, depth perception and the ability to focus.
WORK ENVIRONMENT:
The following working environments are as follows but not limited to:
Required to work near moving mechanical parts and machinery.&nbsp; Working conditions may include being outside or inside in all environmental conditions.&nbsp; Potential exposure to: fumes and airborne particulates. Potential risk of electric shock.&nbsp; Potential burn hazards such as: UV light radiation, open flames, sparks and other sources.&nbsp; Noise levels in the work environment will require the use of appropriate hearing protection at all times.&nbsp; The correct usage of PPE will be required at all times.
Remuneration
We offer a competitive compensation and benefits package as well as excellent opportunities for training and advancement.
Canam&nbsp;is an Equal Opportunity/Affirmative Action employer.&nbsp;All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law.
If you need a reasonable accommodation for any part of the employment process, please contact us by email at <a href="mailto:lorri.boynton@canamgroupinc.com" target="_blank">lorri.boynton@canamgroupinc.com</a> and let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this e-mail address.

Iron Worker / Rigger

<h3>Job Description</h3>
Job DescriptionCompany Description 
Ready to make your next move? A career at&nbsp;STS Aerospace&nbsp;allows you to take ownership of challenges, think creatively and be a part of our exciting growth journey.
STS Aerospace&nbsp;in Laconia, NH is searching for a&nbsp;Manual Welder&nbsp;to join the team.&nbsp; This position is responsiblefor the joining ofmetal components together using a variety of arc and gas welding equipment to fabricate or repair products such as machined parts, fabrications, and tubular assemblies.&nbsp;
Job Description 
Essential Duties and Responsibilities 
<ul>
<li>Welds and fabricates flexible and rigid tube assemblies composed of a variety of materials using manual and automatic arc welding processes.</li>
<li>Assesses welds for conformance to visual and dimensional requirements.</li>
<li>Positions and clamps together components of fabricated metal products preparatory to welding.</li>
<li>While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; talk and hear.</li>
<li>The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds.&nbsp;</li>
<li>Specific vision abilities required by this job include close vision and ability to adjust focus.</li>
<li>Consistently, regularly and predictably at work and on time</li>
<li>Other duties may be assigned as needed</li>
</ul>
Qualifications 
Education, Certifications, Licenses, &amp; Registrations&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
High school diploma or general education degree (GED); or five years related experience and/or training; or equivalent combination of education and experience.
Welding certifications based upon business requirements.
 Additional Information 
<ul>
<li>401(k)</li>
<li>Medical, Dental, Vision Insurance</li>
<li>Employee Assistance Program (EAP)</li>
<li>Flexible Spending Account (FSA)</li>
<li>Health Savings Account (HSA)</li>
<li>Life insurance</li>
<li>Paid time off&nbsp;</li>
<li>Tuition Assistance</li>
</ul>
We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity.
At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Manual Weld

<h3>Job Description</h3>
Job Details Job Location Portsmouth, NH - Portmouth, NH Position Type Full Time Education Level High School Travel Percentage None Job Shift Day Job Category Construction Description Position Summary: The Pipefitter will participate in the installation or maintenance and inspection of HVAC, Utility and Process Piping Systems. Role and Responsibilities: 
<ul>\n
<li>Regular attendance at assigned location that may include office or other project sites</li>
\n
<li>Works with materials that include carbon steel, stainless steel, plastics, fiberglass, copper, i.e., brazed soft soldered and pro-press</li>
\n
<li>Work on systems that include Heating Hot Water, Chilled Water, Steam, Condensate, Compressed Air, Process Fluids, Chemical, Refrigeration Systems, Fuel Oil, and other Fuel Related Systems.</li>
\n
<li>Perform Proper fit-up of pipe, fitting, and flanges for open root butt welding and socket welding</li>
\n
<li>Test Pipes or fixtures for leaks using various methods</li>
\n
<li>Install pipe and assemble fittings, valves, appliances, or fixtures using hand or power tools</li>
\n
<li>Detect faulty operation of equipment or defective materials and notify supervisors</li>
\n
<li>Direct helpers or apprentices in appropriate tasks</li>
\n
<li>Additional duties as directed by job site foreman, project manager, and supervisor</li>
\n
<li>Locate and mark the position of pipe installations, connections, passage holes or fixtures using measuring instruments such as rulers or levels</li>
\n
<li>Measure, cut, thread, or bend pipe to required angle using hand or power tools or machines such as pipe cutters, pipe-threading machines, or pipe-bending machines</li>
\n</ul>
\n Qualifications Essential Skills &amp; Characteristics: 
<ul>\n
<li>Ability to work independently or as part of a team</li>
\n
<li>Follow plans and instructions from supervisors or more experienced workers more</li>
\n
<li>Strict adherence to all safety rules and quality</li>
\n
<li>Participate in site housekeeping</li>
\n
<li>Interact with all co-workers and clients in an attentive courteous manner</li>
\n
<li>Follow blueprints and building plans to meet the needs of clients</li>
\n
<li>Maintain good documentation and record keeping</li>
\n
<li>At times may perform clerical/administrative duties</li>
\n</ul>
\n Educational &amp; Experience Requirements: 
<ul>\n
<li>High School Diploma or relevant field experience</li>
\n
<li>5 years of Field Experience, trade school or apprenticeship</li>
\n
<li>Appropriate State Trade License</li>
\n
<li>OSHA 10 certification</li>
\n
<li>Understand and development of daily Job Hazard Analysis (JHA)</li>
\n
<li>Maintain good documentation and record keeping</li>
\n
<li>Knowledge of industrial construction preferred</li>
\n</ul>
\n AZ Corporation is an employee owned, tobacco-free, equal opportunity employer, we do not discriminate based on marital status, race, color, creed, gender, sex, religion, national origin, gender identity, age, veteran status, union affiliation, physical or mental disability, citizenship status, sexual orientation, genetic information, or other legally protected status

Journeyman Pipefitter

<h3>Job Description</h3>
Job DescriptionSalary: $30-$45 per hour 
Territory for this position is Boston, MA
 
Company Summary: T&amp;J Appliance Solutions is a division ofT&amp;J Companies, a family-owned and operated company based in Clifton Park, NY. T&amp;J Companies and its divisions self-perform commercial appliance and electrical services for customers throughout the Northeast with a focus on retail locations. Our team is professional, agile, and customer centric. Our goal is to Provide our customers with fast, reliable service they can count on while growing our family-run business into a top employer in the area. Position Summary: The Commercial Appliance Technician is responsible for responding to customer work orders as assigned by their service manager. This includes traveling to and from customer locations to troubleshoot and resolve issues as needed. Hours and Travel: - Standard hours are Monday-Friday | 7:00am-3:30pm. This is subject to change based on customer schedules and managements discretion. - Mandatory on-call weekend rotation.
 Responsibilities and Duties: The Commercial Appliance Technician a critical role for our new Appliance Solutions division and will provide key support for our customers in a timely and professional manner. The Commercial Appliance Technician Primary Responsibilities and Duties include: - The Service Technician is responsible for responding to customer work orders as assigned by their service manager. This includes traveling to and from customer locations to troubleshoot and resolve issues as needed. - The technician will be given a van, company fuel card, credit card, phone and iPad. All work orders are dispatched electronically via the phone/iPad the afternoon before. The tech is expected to quickly view those work orders, so they are aware of their next days schedule. - The Service Tech is expected to take their vehicle home each night. - Company Vehicle is permitted for work use ONLY unless cleared by T&amp;J Service Manager ahead of time. All vehicles are GPS monitored not only for locating, but for monitoring safe driving habits. - The Service Tech will report via phone to their manager here in Albany. The service manager is always available to assist the tech with any all questions and concerns. - The Service Technician is required to follow all company policies and procedures both internally and externally facing. Qualifications: Required Skills and Abilities: - Must have a clean driving record - Candidates must be willing to drive up to 2 hours (one way) for service calls - Excellent communication and troubleshooting skills as your supervisor will be remote, in our main office - Ability to work independently and with others - Excellent verbal and written communication skills - Excellent interpersonal and customer service skills - Excellent organizational skills and attention to detail Experience - Experience maintaining, troubleshooting and replacing TurboChef, Merry Chef, Bunn, Mastrena, Hatco, Clover Vertica, Franke or similar equipment is preferred - Knowledge of the Facility Services industry is preferred Education/Licensure/Certifications - High School Diploma or equivalent is required - Refrigeration certification highly encouraged, but not mandatory Physical Requirements - Must be able to lift up-to 50 pounds at times Other Requirements: - Candidates must be authorized to work in the United States - Candidates must pass a drug test and background check prior to starting work Compensation and Benefits: - $30-$45 per hour based on experience - Health Insurance offered - Dental Insurance offered - Employee discount program - Opportunities for growth and development

Commercial Appliance Service Technician (MA)

<h3>Job Description</h3>
Job Description
Overview
SiteOne Landscape Supply is the largest national distributor of landscaping products across the United States and Canada. As a leading supplier of wholesale goods for green industry professionals, we have a long history of serving those who design, build, and maintain outdoor spaces – from lawns and gardens to golf courses, sport fields and more. We pride ourselves on knowing our customers and their business better than anyone else and providing them with a one-stop shop of extensive inventory covering irrigation, lighting, turf and landscape maintenance, hardscapes, nursery, and pest control supplies.
At SiteOne, we are passionate about delivering an outstanding customer experience and will stop at nothing to help our customers win. We know that our associates are the key to this success, and our commitment to the SiteOne DNA and support for our associates through development programs, benefits, and perks align with our vision to "Be a Great Place to Work for Our Associates". We foster a culture of safety, teamwork, and continuous improvement. With over 800 locations and exciting expansion ahead, now is the perfect time to join SiteOne and grow Stronger Together™!
 
Responsibilities
Our Yard Associates help achieve world-class store performance while contributing to and supporting the overall branch strategy, performance, and growth. Yard Associates organize product for deliveries to job sites and help maintain the overall organization of the branch. 
What you’ll do:
<ul>
<li>Unload product from incoming trucks.</li>
<li>Load products into outbound vehicles, both customer and company.</li>
<li>Replenish or move product at the branch as directed.</li>
<li>Assist customers with product selection and provide additional support when needed.</li>
<li>Partner with branch leadership to understand and implement new technologies and ways of working to help positively impact business performance.</li>
<li>Other duties as assigned.</li>
</ul>
 
Qualifications
<ul>
<li>Must be able to lift up to 50 pounds on a consistent basis</li>
<li>Must have a safety-minded work ethic</li>
<li>Must be customer-focused and an enthusiastic, dependable team player</li>
<li>Ready and willing to learn and adopt new technologies and ways of working</li>
<li>Green industry experience and familiarity with landscape, hardscape, nursery, forestry, or irrigation products is a plus</li>
<li>Experience operating equipment such as a forklift, skid steer, or front-end loader also a plus</li>
<li>High school diploma or equivalent preferred</li>
</ul>
Compensation &amp; Benefits:
<ul>
<li>Competitive Compensation</li>
<li>Medical, Dental and Vision plans</li>
<li>Paid Time Off, Paid Holidays</li>
<li>DailyPay available!</li>
<li>401k with company match</li>
<li>Tuition Reimbursement</li>
<li>Lucrative Associate Referral Program</li>
<li>Company Apparel and Work Boot Vouchers</li>
<li>Opportunity for Advancement</li>
<li>Paid Training and Business Certifications Available</li>
<li>Free Counseling Services/Employee Assistance Program</li>
<li>Life Insurance and Short- and Long-Term Disability Insurance</li>
<li>Product Discounts</li>
<li>Most Branches never work Sundays!</li>
</ul>
THE INFORMATION CONTAINED HEREIN IS NOT INTENDED TO BE AN EXHAUSTIVE LIST OF ALL RESPONSIBILITIES, DUTIES AND QUALIFICATIONS REQUIRED OF INDIVIDUALS PERFORMING THE JOB. THE QUALIFICATIONS DETAILED IN THIS JOB DESCRIPTION ARE NOT CONSIDERED THE MINIMUM REQUIREMENTS NECESSARY TO PERFORM THE JOB, BUT RATHER AS GUIDELINES. THEY MAY VARY FROM POSITION TO POSITION.
SiteOne Landscape Supply is strongly committed to providing equal employment opportunities for all associates and all applicants for employment. All employment decisions at SiteOne-including those relating to hiring, promotion, transfers, benefits, compensation, placement, and termination-will be made without regard to race, color, national origin, genetic information, creed, sex, sexual orientation, gender, gender identity, religion, age, veteran status, uniform service, pregnancy, disability, or any other factor protected by applicable law.
If you are ever unsure whether a message is really from SiteOne, here’s how to protect yourself from recruiting scams:
<ul>
<li>SiteOne will never ask for payment, sensitive personal info, or documents over email, messaging apps., or interviews</li>
<li>All SiteOne job openings and updates will be posted on our official careers page: <a href="https://careers.siteone.com/" target="_blank">https://careers.siteone.com/</a></li>
<li>SiteOne job related emails will be sent with a @siteone.com. All other variations are likely fraudulent.</li>
<li>You can always reach our SiteOne team directly at <a href="mailto:Recruiting@siteone.com" target="_blank">Recruiting@siteone.com</a> to confirm</li>
</ul>

1,221 Construction Jobs